Shenzhen Crescent Optoelectronic Co., Ltd.
Exhibition
Are SMD LED Beads Environmentally Friendly?
At present, more and more surface mounting device led beads have replaced conservative lighting lamps, and are used in l...
What are the Differences between COB Package and SMD Package in the Field of LED Display?
The existence of double giants in the field of LED display has jointly developed and flourished the LED industry. As a c...

What is 5050 SMD LED?

Definition: diode semiconductor device is in which electrons and holes continuously flow through PN junction or similar structure surface and spontaneously compound to generate radiated light.

SMD 5050 led


Light-emitting diodes are called LED for short. Diodes made of a compound of Ga, AS and phosphorus (P) can emit visible light when electrons combine with holes, so it can be used to make light-emitting diodes. To act as an indicator in circuits and instruments, or as a text or digital display. The gallium phosphide diode glows red, the gallium phosphide diode glows green, and the silicon carbide diode glows yellow.

Photoelectric parameters of 5050 SMD LED


The higher the current, the higher the voltage, the higher the temperature, the lower the current, the luminescence Angle: 125,
Forward using current is 60 mA, reverse voltage should not exceed 5V, largest working temperature between - 35 ~ + 60 ℃. If the light failure life is not taken into account, it can also work under +85 degrees with a power of 0.18W (the same power as 0.2W in the market).

Application parameters of 5050 SMD LED


1. (this is the most ideal driving current); Maximum service current shall not exceed 60mA;
2. (it is required that the instantaneous voltage of the lamp bead should not exceed 5V, or it will be damaged or seriously damaged to the LED lamp bead and cannot be repaired);
3. (the heat dissipation design of the lamps is required to be good, and the temperature of LED lamp pin shall not exceed 60 degrees);
4. If the current is 14-20mA, the brightness will be reduced by 4% for each 1mA current reduction;
5. The power is 0.12W at 43-46mA, 0.15W at 46-53mA, and 0.18W at 54-60mA.
6. Low power consumption
7. Long service life under the appropriate current and voltage, LED service life up to 100,000 hours.
8. High brightness, low heat than HID or incandescent lamp less heat radiation.
9. Environment-friendly LED is made of non-toxic materials, unlike mercury in fluorescent lamps, which can cause pollution. At the same time, LED can also be recycled.
10. Sturdy LED are fully encapsulated in epoxy resin and are stronger than light bulbs and fluorescent tubes. There is no loose part inside the lamp, which makes the LED not easily damaged.
11. Strong controllability and easy to achieve color change and light and dark change, and rapid response.
Related News
  • The Packaging Difference Between SMD LED and COB LED

    The Packaging Difference Between SMD LED and COB LED

    March 13, 2019The Definition of COBCOB is the abbreviation of chip on board, which means chip-on-board packaging, a bare chip mounting technology. The semiconductor chip is placed on the printed circuit board, and ...view
  • LED Chip Voltage

    LED Chip Voltage

    January 19, 2019An LED chip is actually a light emitting diode that emits light when loaded with a certain voltage and current. Generally speaking, the voltage of a single led chip is about 3V and the current is 30mA...view
  • Characteristics of 3528 Patch LED Beads

    Characteristics of 3528 Patch LED Beads

    June 27, 2019At present, patch LED beads are the most widely used LED light-emitting diodes in the market. The quality of patch-type LED beads on the market is uneven, mainly due to the different materials in the ...view
  • LED Package of Great Significance To LED Bead Quality

    LED Package of Great Significance To LED Bead Quality

    February 22, 2019Luminescence principle of LED patch bead: the terminal voltage of PN junction forms a potential barrier. When the forward bias voltage is added, the barrier drops, and most carriers in the P and N reg...view